 |
|
|
|
| Lone Star Plastics |
| 2875 Market St. |
| Garland, Tx. 75041 |
|
| p: (800) 373-9410 |
| f: (972) 840-2845 |
|
|
| Lone Star Plastics |
| 1107 Doster Road |
| Prattville, AL 36067 |
|
| p: (800) 373-9410 |
| f: (972) 840-2845 |
|
|
|
 |
|
|
|
| glossary |
|
 |
|
|
Definition of garbage, trash or waste bags. Typically used in industrial, institutional and medical applications.
Small clear bags designed to hold a variety of small objects (e.g., bread, poultry, vegetables, etc.). Usually in quart and gallon sizes.
The physical strength of the can liner. Some resins have a higher film strength than others. Our can liners are made from the highest quality resin.
Used to determine the resistance of a bag to local failure or puncturing of the film.
A test used to measure the resistance to tearing or puncture.
A measurement of how much wet weight a can liner will hold.
A measurement of how much dry weight a can liner will hold.
Term used to describe thickness. LDPE and LLDPE can liners are measured by mil and HMW-HDPE can liners are measured by micron thickness.
(One thousandths of an inch) A measurement of LDPE and LLDPE can liners. One mil is .001". Can liners range between .35 to 4.0 mil.
A measurement of HMW-HD can liners. 25.4 microns equals .001". 1,000 microns (M) = 1mm. HMW-HDPE can liners are 6 to 24 microns.
|
 |
|
|
|
|
|
|
